READY SHIP PROGRAM

Choose from our four most popular custom beer shelves; ready to be shipped out in just one day.

enjoy custom shelving in catalog time

Our job is to make life easier for you, your employees, and your beverage operation. Save on time and money by registering for our Ready Ship Program.

How It Works

Cooler Concepts is proud to announce our Custom Beer Cooler Shelving Ready Ship Program that features four of our most popular profiles (SKS, SKSTCS, DKS, and DKSRCS). When using these profiles, they can be a singular shelf section or multiple of the same profile strung together to form a continuous run of shelving. You cannot link one shelving profile to any of the other four profiles offered. To do so would remove the shelving from the Ready Ship program and become our original Custom Beer Cooler Shelving ordering format. If the initial shelving needs to incorporate an attachment to make a turn down an adjacent wall, this also will remove the shelving from the Ready Ship program. To get a better understanding of how to apply the proper size shelving to the full interior dimensions of your walk-in beer cooler, see the example below.

Picking Out The Right Model

Here’s an example: Let’s say you have an interior cooler depth of 185” (door wall to opposite wall). Along one of the 185” sidewalls you want to place our DKS shelving. You may want to maximize the storage potential or only have a certain number of kegs stored. Let’s assume the former and plan for a whole wall of shelving. You should take off from the 185” dimension to allow for a safe harbor (5” for odd size dimensions, 4” for even size dimensions is a good standard). Keep in mind additional obstructions, i.e. star wheels, conduits, condensers, etc., which may require an extra amount of hold-off. Divide the remainder of 180” by 16” (rough estimate keg size) to break down into the number of kegs wide available for storage (11+). (See Figure 1 Below)

Now that you know you have 11 kegs wide, start to use combinations of widths to make this dimension using the Base Unit options we have available for the DKS model. You might choose a DKS66 as your base unit to start with (see Figure 2). You should hold the end of the unit off the wall when beginning by 2” or 2-1/2” (half of the amount you removed for safe harbor). In this case we are holding off by half of 5”.

Figure 2

Using the Extension Unit table provided below, add additional extension units to complete remainder of the 180” usable space: (01) DKS66-EX, (01) DKS48-EX (see Figure 3 below). The true total length of shelving used is 180-3/4” (accounts for leg support thickness) and stores a total of 44 kegs. There must always be one base profile unit per continuous run of shelving. Add extension units, notated with (-EX), for the remainder of a singular run of shelving. One of the outside legs of the base unit will move to the final outside position of the extension units. The common leg that accompanies the extension unit will support it and the shelf it is next to. The same process should be applied to the 3 remaining profiles offered through the ready ship program (DKSRCS, SKS, & SKSTCS).

Special Notes You’ll Want To Keep In Mind

R

Know How Tall Your Ceilings Are

When planning for profiles with a case shelf for third tier of storage, keep ceiling heights and obstructions such as evaporator coils in mind.

R

Typical Beer & Wine Case Heights

A typical beer case height is approximately 9-1/2”, and a typical wine case height is 12”.

R

Orders Must Be Confirmed By A Dealer

An Equipment Dealer placing the order is responsible to confirm that what is ordered will fit. Returns will incur a 25% restocking fee at the dealer’s expense. Dealers must obtain an authorization from factory prior to returning any materials (see factory’s return policy for a full list of instructions).

sks model

specifications

17” deep keg shelf at 31.5” AFF.
Holds one (1) half-barrel (15.5 Gallon) keg deep.
Keg shelving rated at 125lbs sq.ft.
Welded structural steel construction
Hot dipped galvanized ﬁnish standard on all pieces.
Assemble with Grade 5 hardware (included).

features

Designed size speciﬁc for beer products
Can increase storage capacity up to 40%
Easy to assemble modular components
Welded keg stop standard on all keg shelves
Constructed to allow for maximum air ﬂow, drainage, and prevention of debris build-up
Alternate ﬁnishes available
Leveling feet available for uneven ﬂoors
Weight distribution pads available for reinforced ﬂoors
Rear safety ﬂats available for cooler component protection

base units

There are a total of 7 base units available for the SKS 17″ Single Deep Keg Shelf. To learn more about each, please visit here.

extension units

There are 7 extension units offered for the SKS Model. To learn more about each, please visit here.

get a quote

skstcs model

specifications

17” deep keg shelf at 31.5” AFF.
Holds one (1) half-barrel (15.5 Gallon) keg deep.
14.5” deep case shelf at 67.5”AFF.
Keg and case shelving rated at 125lbs sq.ft.
Welded structural steel construction
Hot dipped galvanized ﬁnish standard on all pieces.
Assemble with Grade 5 hardware (included).

features

Designed size speciﬁc for beer products
Can increase storage capacity up to 40%
Easy to assemble modular components
Welded keg stop standard on all keg shelves
Constructed to allow for maximum air ﬂow, drainage, and prevention of debris build-up
Alternate ﬁnishes available
Leveling feet available for uneven ﬂoors
Weight distribution pads available for reinforced ﬂoors
Rear safety ﬂats available for cooler component protection

base units

There are 7 base units available for the SKSTCS Keg Shelf. To learn more about each, please visit here.

extension units

The SKSTCS 17″ Single Deep Keg Shelf has 7 different extension units available. To learn more about each, please visit here.

get a quote

dks model

specifications

33” deep keg shelf at 31.5” AFF.
Holds two (2) half-barrel (15.5 Gallon) kegs, two (2) deep front to back.
Keg shelving rated at 125lbs sq.ft.
Welded structural steel construction
Hot dipped galvanized ﬁnish standard on all pieces.
Assemble with Grade 5 hardware (included)

features

Designed size speciﬁc for beer products
Can increase storage capacity up to 40%
Easy to assemble modular components
Welded keg stop standard on all keg shelves
Constructed to allow for maximum air ﬂow, drainage, and prevention of debris build-up
Alternate ﬁnishes available
Leveling feet available for uneven ﬂoors
Weight distribution pads available for reinforced ﬂoors
Rear safety ﬂats available for cooler component protection

base units

There are 7 Base Units available for the DKS 33″ Double Deep Keg Shelf. To learn more about each specific model, visit here.

extension units

There are a total of 7 different extension units available for the DKS 33″ Double Deep Keg Shelf. For a breakdown of each model, please visit here.

get a quote

dksrcs model

specifications

33” deep keg shelf at 31.5” AFF.
Holds two (2) half-barrel (15.5 Gallon) kegs, two (2) deep front to back.
24” deep case shelf at 67.5” AFF.
Keg and case shelving rated at 125lbs sq.ft.
Welded structural steel construction
Hot dipped galvanized ﬁnish standard on all pieces.
Assemble with Grade 5 hardware (included).

features

Designed size speciﬁc for beer products
Can increase storage capacity up to 40%
Easy to assemble modular components
Welded keg stop standard on all keg shelves
Constructed to allow for maximum air ﬂow, drainage, and prevention of debris build-up
Alternate ﬁnishes available
Leveling feet available for uneven ﬂoors
Weight distribution pads available for reinforced ﬂoors
Rear safety ﬂats available for cooler component protection